无码人妻精品一区二区三区99不卡_两个人看的www在线观看_亚洲乱码国产一区三区_久久久久国色A∨免费看
EN/CN

Product

ST115G

Characteristic

Excellent heat dissipation

Excellent thermal and insulation reliability

Lower Z-axis CTE., High CTI

Halogen-free,Tg 175℃(DMA)

Application Area

PCB heat dissipation solution

AutomotiveElectronics, LED Headlamp

Consumer Electronics(Intelligentterminal, SSD)

  • Product Performance
  • Product Certificate
  • Data Download
Items Method Condition Unit Typical Value
Thermal Conductivity ASTM-D5470 A W/ (m?K) 1.6

ASTM E1461 A
2.0
Tg 2.4.25D DSC 170
Td
2.4.24.6 Wt 5% loss 410
Thermal Stress 2.4.13.1 288℃, solder float min
>30
CTE (Z-axis) 2.4.24 Before Tg ppm/℃ 37
After Tg ppm/℃ 166
50-260℃ % 2.2
Volume Resistivity 2.5.17.1 C-96/35/90 MΩ/cm 108
Surface Resistivity
2.5.17.1
C-96/35/90 107
Dielectric Breakdown 2.5.6 D-48/50+D-0.5/23 kV >45
Peel Strength (1oz) 2.4.8 288℃/10s N/mm 1.05
Flammability
UL94
C-48/23/50
Rating
V-0
Water Absorption IPC-TM-650 2.6.2.1
E-1/105+D-24/23 % 0.11
CTI IEC60112 A Rating PLC0

Remarks:

Remarks:

1. All the typical value is based onthe 1.0mm specimen, while the Tg is for specimen≥0.50mm.

2. All the typical values listed above arefor your reference only and not intended for specification. Please contactShengyi Technology Co., Ltd. for detailed information. All rights from thisdata sheet are reserved by Shengyi Technology Co., Ltd.

3. UL certificated Single/Double sidePCB min. thickness 0.38mm.

Explanation:C=Humidity conditioning, D=Immersion conditioning in distilled water,E=Temperature conditioning

Thefirst digit following the letter indicates the duration of preconditioning inhours, the second digit the preconditioning temperature in ℃ and the third digit the relative humidity.

无码人妻精品一区二区三区99不卡_两个人看的www在线观看_亚洲乱码国产一区三区_久久久久国色A∨免费看